How Do You Read Net Metering on an Electric Bill?
Quick Summary
Your net metering bill shows the electricity you pulled from the grid (delivered) and the electricity your panels sent back (received). The utility nets these two totals together for the billing period. If you pulled more than you sent, you owe the difference; if you sent more, you carry a credit forward.
- Circle the billing period start and end dates first, since every kWh figure belongs to that window.
- Look for delivered, received, and net kWh lines, which may be labeled differently by each utility.
- Check for a separate solar or net metering section lower on the bill, where credits often appear.
- Subtract start-of-period meter readings from end-of-period readings to verify the kWh figures.
- Call your utility if credits disappear, export totals look too low, or rates change without notice.
Table of Contents
- What Net Metering Does to Your Electric Bill
- Step 1: Locate the Net Metering Lines on Your Bill
- Step 2: Read Imported and Exported kWh Correctly
- Step 3: Reconcile Your Meter Readings With the Bill
- Solar Net Metering Bill Example, Line by Line
- How to Calculate Your Net Metering Bill
- Downloading and Using a Net Metering Bill Reading Guide PDF
- Checking Your Next Bill and Getting Help Verifying It
- Frequently Asked Questions
What Net Metering Does to Your Electric Bill
Last Updated: November 14, 2026
Net metering is the billing arrangement that lets your rooftop solar system send extra power to the grid and get credit for it. Your utility tracks two numbers: the electricity you pull from the grid and the electricity you push back.
Go Solar DMV helps homeowners in Virginia, Maryland, and Washington, D.C. understand these bills before they sign anything.
Net metering is different from simply having solar panels on your roof. Readers comparing how Maryland and Virginia treat exported energy credits can see the key differences in Maryland vs Virginia net metering laws. Panels make power. Net metering is the billing rule that decides how that power is valued on your statement.
- Daytime: Your panels may produce more than your home uses, so surplus power flows to the grid.
- Night: Your home pulls power from the grid again.
- Billing period: The utility nets these two totals together.
When exports roughly match imports over the period, your bill can drop sharply. When exports fall short, you still owe the difference.
Step 1: Locate the Net Metering Lines on Your Bill
Utilities do not format their bills the same way, so it helps to know the standard sections, the alternate labels each one may use, and which numbers feed the net calculation.
Start with the first page. Nearly every residential bill opens with a summary panel that shows the amount due, the due date, and the billing period start and end dates.
Below the summary, the bill usually breaks into four blocks. The labels vary by utility, but the purpose does not:
- Meter and service information: account number, meter number, rate schedule or tariff name, and the read dates. The rate schedule name matters because it tells you which net metering program you are on.
- Usage or consumption detail: the kWh figures. This is where delivered, received, and net usage live, sometimes on one line and sometimes split across a small table.
- Charges and credits: the dollar amounts, including energy charges, fixed customer charges, taxes, and any solar credit applied or carried forward.
- Messages and inserts: program notes, rate change notices, and true-up reminders. Solar credits are sometimes announced here rather than in the charges block.
Now search the usage block for the actual net metering lines. Utilities use inconsistent labels, so scan for these terms and match them by purpose, not by wording:
- Delivered, received, import, export, in, out: the two directional kWh totals.
- Net usage, net kWh, net consumption, net metered usage: the balance after the two directions are compared.
- Generation, production, solar generation, renewable credit: what your system sent back, sometimes shown separately from the export total.
- Banked, carried forward, accumulated credit, credit balance: kWh or dollars held for future periods.
Watch out: Some bills show the solar credit in a separate "Solar" or "Net Metering" section near the bottom, below the standard charges.
Build a small extraction table before moving on.
Keep a copy of the page with these lines highlighted. You will need them in Step 3, when you reconcile the bill against your meter reads.
Step 2: Read Imported and Exported kWh Correctly
A kilowatt-hour (kWh) measures energy use over time. One kWh runs a 100-watt bulb for about ten hours. Net metering bills use kWh for both directions of flow, so the labels matter.

Imported kWh is power your home took from the grid. This usually rises at night and on cloudy days, when panels make little or no power.
Exported kWh is power your panels sent to the grid. This usually rises on sunny afternoons when your home uses less than your panels make.
Here is how to read the pair:
- Imported higher than exported: You used more grid power than you sent back. You likely owe for the gap.
- Exported higher than imported: You sent more power than you used. You likely earned a credit.
- Roughly equal: Your net balance is close to zero, and your charge is mostly fixed fees.
Some utilities show a single net number instead of two separate ones. In that case, a positive number means you owe, and a negative number means you have a credit.
Common mistake: Homeowners often assume exported kWh is paid at the same rate as imported kWh. Many utilities credit exports at a different rate, so read the rate footnote before drawing conclusions.
Step 3: Reconcile Your Meter Readings With the Bill
Your meter shows a running total. The bill shows the change in that total for one billing period. To check the bill, you need two readings: one from the start of the period and one from the end.
Here is the basic method:
- Find the meter reading on or near the start date of the billing period.
- Find the meter reading on or near the end date.
- Subtract the start reading from the end reading for each direction.
- Compare the results with the kWh figures on the bill.
If your numbers are close but not exact, that is normal. Meter reads may happen on different days than the bill dates, and utilities sometimes estimate reads.
If the numbers are far apart, check whether you are reading the correct register. Bidirectional meters often have separate registers for received and delivered energy, and mixing them up will throw off every calculation.
Your solar inverter app may show production that differs from what the meter records. Inverters measure what the panels make, while the utility meter measures what crosses the property line. Your home uses some solar power directly, and that power never reaches the meter at all.
Solar Net Metering Bill Example, Line by Line
Here is a simplified example with made-up numbers to show how the lines connect.
| Bill Line | Example Value | What It Means |
|---|---|---|
| Billing period | 30 days | Length of the statement cycle |
| kWh delivered | 620 kWh | Power pulled from the grid |
| kWh received | 740 kWh | Power sent to the grid |
| Net kWh | -120 kWh | Export exceeded import by 120 kWh |
| Credit carried forward | 120 kWh | Applied to the next period |
Read this example from top to bottom. The utility compares 620 kWh in with 740 kWh out. The 120 kWh surplus becomes a credit.
Your bill will look different, and the names of the lines may vary. Match each line to its purpose, not to the exact label.
How to Calculate Your Net Metering Bill
A single formula gets you close, but it will not match the bill to the cent. That is expected.
Start with the energy balance for the period:
Net kWh = kWh delivered - kWh received
If the result is positive, you pulled more from the grid than you sent back, and the utility bills that gap at your energy rate.
A worked example: you pulled 500 kWh and sent 350 kWh, so net is 150 kWh.
Why the simple formula drifts from the bill
- Fixed charges do not net. Customer charges, meter charges, and most taxes apply whether you import or export. A negative net kWh does not zero out these lines.
- Export credits may use a different rate. Many utilities credit exports at a rate that differs from the retail import rate. Read the rate footnote on the bill or the tariff schedule before assuming a one-to-one offset.
- Time-of-use periods change the math. On a time-of-use rate, imports during peak hours cost more than imports during off-peak hours, and exports may be credited at a period-specific rate. A single blended rate will not reproduce the bill.
- Net billing programs are not net metering. Some utilities compensate exports at an avoided-cost rate rather than a retail-rate credit. The bill lines look similar, but the dollar value of an exported kWh is lower.
How credits carry forward and settle
When your exports exceed imports, the surplus usually rolls forward as a credit balance rather than a cash payment.
Most programs reconcile the balance once a year at a true-up or settlement date.
Reconciling the meter with the bill
Your meter shows a running total in each direction. The bill shows the change over the period.
Your inverter app will almost always show more production than the meter records.
Sample residential bill formats and net metering program pages from major utilities
Run this calculation each period and log the result next to the bill total.
Downloading and Using a Net Metering Bill Reading Guide PDF
Many utilities publish a printable bill guide that explains each line. Search your utility's name with "bill explained" or "net metering" to find it. Save a copy next to your bills so you can compare them over time.
A good guide should show:
- A sample bill with each section labeled
- Definitions for kWh delivered, kWh received, and net usage
- Notes on how credits roll forward
- Contact information for billing questions
If your utility does not offer a guide, use the example as a template. Build a simple table with one row per billing period and columns for delivered, received, net, and credit balance. Tracking these numbers for a few months makes unusual bills easy to spot.
Checking Your Next Bill and Getting Help Verifying It
When your next bill arrives, run through the three steps again: find the net lines, read the two directions correctly, and reconcile with your meter reads. Write down any number that does not match your calculation.
Call your utility if the credit disappears, the export total looks too low, or the rate changes without notice. Ask the representative to confirm the meter type, the billing rate, and the start and end dates used for the bill.
If you are still unsure, you can contact Go Solar DMV through its website for help understanding your statement.
Frequently Asked Questions
How do I know if my solar credits rolled over?
Look for a credit or carryover line in the summary section of your bill, usually labeled as a bill credit balance, excess generation credit, or kWh carried forward. If that balance appears in the next billing period and the total is positive, the credits rolled over. Compare the carryover amount on each bill to the prior month's balance. If the number resets to zero without explanation, contact your utility and ask how excess generation is handled under your net metering tariff.
Why do I still have an electric bill with net metering?
Net metering offsets the kilowatt-hours you import from the grid with the kilowatt-hours you export, but most customers still pay fixed monthly service charges, delivery charges, and certain riders regardless of solar output. Your bill may also show a net balance that is positive, meaning you imported more than you exported during the billing period. Review the fixed charge lines first, then the net kWh line, to see which part of the bill you are paying.
What do imported and exported electricity mean on a solar bill?
Imported electricity, often shown as kWh delivered, is the power your home drew from the grid. Exported electricity, often shown as kWh received, is the surplus solar power your system sent back to the grid. Net kWh is the difference between the two. A positive net figure means you used more grid power than you sent back, while a negative figure means you exported more than you imported, which typically creates credits.
What is a solar meter reading calculator and how do I use one?
A solar meter reading calculator takes the start and end register values from your meter and computes the kilowatt-hours used or exported during the billing period. Subtract the previous reading from the current reading for each register, then compare the results to the kWh figures on your bill. Small differences are normal due to billing cycle dates and estimated reads, but large gaps are worth raising with your utility.