How to Check Your Maryland Solar Export Credit on Your Bill
Last Updated: November 15, 2026
Quick Summary
To check your solar export credit, find the credit line on your monthly bill, usually below your usage charges and labeled with words like "credit," "generation," or "net excess." Note the kilowatt-hours credited and the dollar amount, then subtract that credit from your charges to get the amount you owe.
- Export credits reduce your bill and do not appear as a separate payment.
- Confirm the billing period start and end dates before comparing credits.
- Compare the current meter reading with last month's to find total usage.
- Check the credited kilowatt-hours against your system's production or community solar allocation.
- If the credit is missing or wrong, contact your utility with your account number and billing dates.
Table of Contents
- What a Solar Export Credit Is and Where It Appears on Your Bill
- How to Read an Electric Bill With Solar Step by Step
- Maryland Net Metering Credits on Your Electric Bill
- Potomac Edison Net Excess Generation Credit Explained
- How to Check Your Maryland Solar Export Credit on a Utility Bill PDF
- Troubleshooting Missing or Incorrect Solar Credits
- Booking a Bill Review With Go Solar DMV
- Frequently Asked Questions
What a Solar Export Credit Is and Where It Appears on Your Bill
A solar export credit is the bill credit you receive for electricity your solar system sends back to the grid. In Maryland, this credit is tied to how much energy your system or your share of a project produces. The Maryland Office of People's Counsel explains that the utility applies these credits based on how much energy the customer's project share produces Maryland Office of People's Counsel community solar guidance.
Knowing where the credit shows up makes it much easier to check.
On most monthly bills, the export credit appears as a separate line. It usually shows a kilowatt-hour amount and a dollar value, and it reduces the total you owe. Look for words like "credit," "generation," or "net excess" near the charges section.
- Export credits reduce your bill; they do not appear as a separate payment.
- The credit line often sits below your usage charges.
- Your utility may use different labels, so check the bill's key or legend.
How to Read an Electric Bill With Solar Step by Step
Reading a solar bill is easier when you follow the same order every month and know which labels to expect from your specific utility. Start at the top and work down, and keep your system's monthly production report or your community solar project's allocation statement next to the bill.

- Find the billing period. Confirm the start and end dates. A credit only applies to the days shown, and a bill that spans a rate change or a meter read date shift can move a credit into the next cycle.
- Check the meter reading. Compare the current reading with last month's. The difference is your total usage. On net-metered accounts, look for separate delivered and received kilowatt-hour registers rather than a single usage number.
- Look at the generation or export line. This shows how much electricity your system produced or exported, or how much your community solar share was allocated. The label varies by utility:
- Find the credit line. Note the kilowatt-hours credited and the dollar amount.
- Subtract the credit from charges. The result is what you owe for the period. If the credit exceeds the charges, the remainder may roll forward rather than appear as a payment.
A homeowner reviewing a printed bill at a kitchen table, with a laptop and calculator nearby, can work through these steps in about ten minutes.
Watch out: Some bills show credits from a previous period, and community solar consolidated billing can place the credit on a utility bill even though the subscription is with a separate provider. Make sure you are comparing the right months and the right credit type before you decide something is wrong.
To check whether a credit amount is plausible, multiply the credited kilowatt-hours by the applicable supply or generation rate shown on your bill, then compare that product to the dollar credit. A credit that is far below that product usually means only part of the export was credited, a different rate applied, or the credit is a community solar allocation rather than a net-metering export.
Use this summary to scan the main steps and what to check at each one.
| Step | What to check | Timing |
|---|---|---|
| Find the billing period | Confirm start and end dates | Each bill |
| Check the meter reading | Compare current and last month's reading | Each bill |
| Look at the generation or export line | Note exported or allocated kilowatt-hours | Each bill |
| Find the credit line | Note kilowatt-hours credited and dollar amount | Each bill |
| Subtract the credit from charges | Result is the amount owed for the period | Each bill |
Maryland Net Metering Credits on Your Electric Bill
Confirm these details with your utility before you assume how your credits will roll over.
For a full picture of state incentives that affect your credits, see our Maryland solar incentives, SRECs and tax credits guide. For a side-by-side look at how the two states differ, read Maryland vs Virginia net metering laws.
Rooftop Net Metering Versus Community Solar Credits
Rooftop net metering and community solar credits are not the same thing. Rooftop net metering credits come from your own panels. Community solar credits come from a share of an off-site project.
- Rooftop net metering: Credits come from electricity your own system exports.
- Community solar: Credits come from your subscribed share of a shared solar project.
- Billing differences: Community solar customers in some areas are moving to consolidated billing starting January 2026, according to Nautilus Solar (Delmarva Power).
Knowing which type you have tells you which line on the bill to check.
Potomac Edison Net Excess Generation Credit Explained
Look for the net excess generation line near the bottom of your charges. It typically lists the kilowatt-hours carried over and the value applied.
Check your rate schedule or call the utility if the numbers do not match your expectations.
How to Check Your Maryland Solar Export Credit on a Utility Bill PDF
Many utilities now send bills as PDFs, which you can download from your online account. The steps are the same as for paper bills, but the search tools are faster and you can verify the math without waiting on hold.
- Open the PDF and use Ctrl+F (or Command+F on a Mac).
- Search for "credit," "generation," "export," "net excess," or "received", the last term often flags the kilowatt-hours your meter registered as sent to the grid.
- Note the kilowatt-hour amount and the dollar value on the credit line.
- Compare the number to your system's monthly production report or your community solar allocation statement.
- Run the plausibility check below before you call the utility.
The plausibility check. Take the credited kilowatt-hours and multiply by the supply or generation rate printed on the same bill. If the resulting dollar figure is close to the credit shown, the line item is internally consistent. If it is far apart, one of four things is usually happening: only excess generation (not total production) was credited, a different rate schedule applied, the credit reflects a community solar allocation rather than a net-metering export, or the credit was split across two billing cycles.
Reconciling against production data. Pull the monthly production figure from your inverter app or your community solar project statement. For rooftop net metering, the exported kilowatt-hours on the bill should be less than or equal to total production, because some generation is consumed on site first. For community solar, the allocated kilowatt-hours should match the project's monthly allocation for your subscription size, not your home's consumption.
Utility layout differences to expect. Community solar consolidated billing can place the credit in a separate section labeled for the subscription provider.
If your utility's PDF layout looks different, check the bill's legend. Most utilities include a short explanation of each line, and the legend is the fastest way to confirm which label your utility uses for an export credit versus a community solar credit.
Watch out: A PDF that was reissued after a meter re-read can show a corrected credit that differs from the original bill. Compare the issue date and any correction notice before treating a changed amount as an error.
Troubleshooting Missing or Incorrect Solar Credits
If your credit is missing or looks wrong, start with the simplest explanations. Our Maryland solar interconnection costs, fees, timelines and utility requirements guide covers the interconnection and utility process issues that can also cause credits to look wrong.
- Timing: Credits can appear one billing cycle after production. Check last month's bill too.
- Meter issues: A meter that was not read correctly can throw off the numbers.
- Interconnection problems: Your system may not be fully connected to the grid yet.
- Rate plan mismatch: Some plans handle credits differently.
If the problem continues, contact your utility with your account number, the billing dates, and the credit amount you expected. Keep copies of your bills so you can show the pattern.
Booking a Bill Review With Go Solar DMV
If you want help checking your credits,
Ready to get started? Visit the Go Solar DMV website to learn more about rooftop solar. For answers to common questions before you book, visit our solar FAQs for Virginia, Maryland and D.C. or read about solar panel installation in Silver Spring, MD.
Frequently Asked Questions
Does Maryland have a tax credit for solar panels?
Incentive eligibility, rates and program status change over time, so check the current rules with the relevant state and utility authorities before you rely on any incentive when comparing your bill.
Where does a Maryland utility bill show solar export credits?
Solar export credits usually appear in the charges and credits section of your monthly bill, often listed as a net excess generation or bill credit line. The exact label and location vary by utility, so compare your statement against the utility's sample bill and look for lines that reference generation, exported kilowatt-hours or credits applied to your account.
Do Maryland utilities show solar credits as dollars or kilowatt-hours?
Many bills show credits in both forms: a kilowatt-hour quantity for energy exported to the grid and a dollar amount for the value applied to your balance. Multiply the kilowatt-hours by the applicable credit rate to confirm the dollar figure, and check that the rate matches your rate schedule.
Who should I contact if my Maryland solar bill looks incorrect?
Start by contacting your utility's customer service line with your account number, the billing period and the specific line you believe is wrong. Keep copies of your bills and any meter readings to support your case.